email

Heavy duty peak volts relay

Can be used on all wind turbines that charge battery’s

A dual purpose relay 2 relays built onto one board

Can dump 100 amps total 30 amps can dump into a aux. 12v battery

and 70 amps into water heaters

Relay operates on 12v ,

Zero amp draw when monitoring

The dump load relay can be used to dump voltage of 12/24/48v on the battery as you wire 1 of + positive wires from the 70 amp relay to the battery + positive , the 2nd + positive wire goes to the water heater + and you take the - negative directly from the battery to the load- on the water heater

you don’t have to use water heater to dump, use other items such as

heavy duty lights, air heaters or what ever DC tool you have as long as it will take a good load off the battery’s

will not flatten the battery that you are dumping from as the peak volts is set to dump at 13.2 volts on and off at 12.5 v (can be adjusted)

Heavy duty relay’s for continues use

designed by myself to protect that battery from over charge and not to kill the volts by taking it too low

Easy to fit, comes with simple to follow instructions

Made in the UK

[Home] [Hornets] [blades] [Blade Theory] [warning] [Fitting] [projects] [Turbine Kit] [Battery-tales] [Hub-Bub] [440amp relay] [Dump Load] [Dual relay] [Manta-PMA]